100W Electronic Load Discharge Digital Capacity Tester Module L7Z3

Description

This electronic load can automatically change the speed with the high speed fan. Fine quality heat sink can serve a long performance. It supports multiple protections of overheat, overpower, over-voltage, reserve polarity and voltage abnormity.
Features:
A professional test module for detecting discharge capacity.
High speed of the fan can change according to the heat sink temperature.
of over-heating, overpower, over voltage, reserve polarity, and voltage abnormity.
Equipped with industrial large tooth heat sink, dust-resistant, which can run for a long .
Long-lasting construction for a long performance.
Specifications:
Item type: Electronic Load
: DC12V±5%
Fan Current: 0.72A
Constant Discharge Current : 0-10A(whole machine)
Working Mode: Mode Constant Current()
Discharge Current Max Error: 0.7%-0.01A
Max. Capacity Test Error: 0.5A 2.5%, 2A 1.5%, 5A and above 1.2%
Max. : 100W
Input Interface: 5.5 * 2.5mm
Package weight: 458g / 1pounds
Package size: 140 * 130 * 120mm / 5.51 * * 4.72inches
Operation Instructions:
Connect with DC12V and enter electronic load mode, ensuring in a stopping state, connect the under test to the test input port. Please pay attention to connect the right polarity!
Set constant current through knobs.
Note: Since it works openly, there is no voltage and limitation, but normal work should be below 100V, 100W.
Package list:
1 * Electronic Load