Ancel Ba301 6V 12V Car Battery Load Tester Alternator Analyzer Automotive Batter

Description

Store
New Arrivals
Add to Favorite
View Feedback
Contact
ANCEL BA301 6V 12V Car Battery Load Tester Alternator Analyzer Automotive Battery Cranking and Charging System Test Tool for Motorcycle, Car, Boat, Light Truck and More
Description
Reliable Car Battery Tester, Accurate & Quick - At ANCEL, we use only the highest-grade materials on the market. Equipped with premium quality & sensitive electric components as well as the heavy-duty clamps, ANCEL BA301 automotive battery tester enables quick and convenient test, with accurate results displaying on backlit LCD screen in seconds
Powerful Application - Works on all 6V & 12V lead-acid batteries ranging from 100 to 2000 CCA, including regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries for the lawn mower, motorcycle, car, light truck, boat, etc. Supports the majority of vehicle battery standards, such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE
More Accurate Battery Test - Enables you do the car battery checking based on battery location in-vehicle or out-of vehicle, capacity for analyzing battery health status and quickly providing more accurate test results, displays voltage value, standard CCA, measured CCA, SOH(%), SOC(%), internal resistance and more
Perform Multiple Battery System Tests - Analyzes starter cranking and alternator charging condition. Cranking Test to test and analyze the starting motor (cranking time, voltage, and status), and the Charging Test to check and analyze the charging system (load voltage, unloaded voltage, ripple status, charging system status)
Quickly Read Voltage Changes - Features one click "waveform" to record the voltage changes (current voltage, maximum and minimum voltage) in a graph during ignition. You'll know if the battery needs to be replaced or not through analyzing the values of discharge voltage, starting voltage, and charging voltage
Free Update and Print - The battery analyzer brings the greatest convenience to you for easily performing battery system tests, designed with 3 LED lights in green, yellow, red indicating battery different health status. Able to store, review and transfer the test results to computer for printing and further analysis. Plus free update service
Product Description
ANCEL BA301
battery tester adopts the state-of-the-art conductance testing technology to measure the actual cold cranking amps capability of starting battery, battery health status, and common fault of starting system and charging system quickly and accurately. It works on all automotive
6V & 12V
100-2000 CCA lead-acid batteries of car, motorcycle, light truck, and more, including regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries. And it features the "Waveform" menu and a hot-key on the device to monitors real-time voltage. This tool lets you know the battery status in advance and replace with a new battery in time, save a trip, and money to an auto repair shop.
The test result includes 5 kinds of battery status and possible causes:
1. Good Battery
The battery is without any problem, please be relaxed to use.
2. Good, Recharge
Good battery but low current, recharge before using.
3. Replace
The battery is near to or already reached the end of the using life, please replace the battery. Otherwise, bigger danger will be followed.
4. Bad cell, Replace
Battery interior damaged, bad cell or short circuit, replace battery.
5. Charge, Retest
Unstable battery shall be recharged and retested to avoid error. If the same test result appears after recharge and retest, the battery is regarded as damaged, replace the battery.
BATTERY CHECK
Check 6V Motorcycle Battery
BA301 battery analyzer works on not the 12V battery of the automotive but also the
6V battery of the motorcycle
. Select motorcycle battery model and it takes around 1 second to display the test result, including battery condition, the status of health, internal resistance(mΩ), measured CCA, standard battery model, voltage value.
ANCEL BA301 Battery Tester Highlights:
1. Work on
6V & 12V
100-2000 CCA battery
2. Check battery health status
3. Cranking test & Charging test
4. Monitor real-time voltage in Waveform
5. Get a accurate test results in merely seconds
6. Able to store, review, print the test result
7. Voltage measurement range: 6-16V DC
8. Free update
CANNOT test lithium battery and solar battery
No internal battery required and gets power directly from the detected battery
Test the battery with loss of electricity directly, a full charge is not required before testing
Cranking Test
The cranking test is used to test and analyze the actual required cranking current and cranking voltage to check the starting motor works properly or not. The test result displays cranking time, voltage, and status. If the stating malfunction may cause an increased starting loaded torque; or rotor friction of the starting motor generates increasing friction of the starting motor itself
Charging Test
Charging test is used to check and analyze the charging system (generator, rectifier, rectifier diode, etc.) status, displays load voltage, unloaded voltage, ripple status, charging system status, thus to find out whether the output voltage of the generator is normal, the rectifier diode works properly or not, which avoids damaging the battery and shortening its life greatly due to overcharging or incomplete charging.
Monitor Real-time Voltage
BA301 battery tester can monitors real-time voltage to check battery health status. There's a hot-key to directly one-click read the voltage change graph. The waveform displays current voltage, maximum, and minimum voltage during ignition, and it will stay static until there are voltage changes detected. By analyzing the voltage of discharge, starting, and charging to know if the battery needs to be replaced or not.
Battery Type Coverage
This load tester can detect all automotive 6V&12V lead-acid batteries, such as regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries of motorcycle, boat, vehicle, light truck and more. It gives you accurate test results in merely seconds based on CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE battery rating standards
Battery Location Supported
Two test models “IN VEHICLE” and “OUT OF VEHICLE” allow you to test the battery according to its location, provide you with more accurate test results quickly, thus replacing the bad cell in time. Designed with a large easy-to-read color LCD screen and user-friendly navigation menu, even a beginner can use it at ease.
Free Update & Print
Able to store, review, and transfer the test results and multiple voltage waveform graphs to a computer for printing and further analysis. free update via software online available. Download the software on ANCEL official website, and it supports Windows XP/7/8/10 operating systems, not compatible with Mac OS and Linux.
Test Voltage
12V
12V
12V
6V/12V
12V/24V
12V/24V
Application
Check & Analyze 12V Lead-acid Battery
Check & Analyze 12V Lead-acid Battery
Check & Analyze 12V Lead-acid Battery
Check & Analyze 6V/12V Lead-acid Battery
Check & Analyze 12V/24V Lead-acid Battery
Check Automotive Electrical System
Test Range
100-1100CCA
100-2000CCA
100-2000CCA
100-2000CCA
100-2000CCA
12V/24V Source
Battery Standards Supported
CCA, CA, MCA, JIS, DIN, IEC, EN, SAE
AH, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE
CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE
CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
4 working modes: DC/AC voltage/Resistance/Diode
Test Cranking System
Test regular flooded, AGM flat plate, AGM spiral, GEL battery
Cranking time, voltage and status
Cranking time, voltage and status
Cranking time, voltage and status
Storage battery test,Maximum load system test
Continuity test/Activate components/Voltage & polarity/Signal circuit test etc.
Test Charging System
Test result: SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc.
Load voltage, unloaded voltage, ripple status, charging system status
Load voltage, unloaded voltage, ripple status, charging system status
Load voltage, unloaded voltage, ripple status, charging system status
Engine system activation load test, Charging system test
Feature red/green polarity indicators, follow & locate short circuit, check bad Ground contacts
Real-time Voltage Waveform
Features "Quick Test" with AH value
✓
✓
Testing trailer lights and connections
Print Data
✓
✓
✓
Built-in thermal printer
Circuit breaker protection
Internet Update
✓
✓
20 feet extension cord
SHIPPING
We ship Fast and using tracking method only.
We offer free shipping to most of the addressed.
Please be noted,
WE CANNOT
accept P.O. Boxes, Rural Address or Forward Address.
Please provide a physical address.
RETURNS
We offer a 30-Day Return Policy on items which you are not completely satisfied with.
You have the option for a full-refund or an exchange of the item.
No returns are available on items shipped outside of the USA.
PAYMENT
We accept PayPal.
CONTACT US
This page content is yet to come
Please ad us to your favorite seller and visit again later
Thank You
CUSTOMER SATISFACTION
If there's a problem, message us!
Please contact and we will get back to you asap!
Currently Support PAYPAL Only