-40%

Briggs & Stratton Snow Engine ¾”X 2-27/64” 208CC 950 9.5 G 13D136-0010-F1

$ 44.87

Availability: 11 in stock
  • Restocking Fee: No
  • Engine Size: 208cc
  • Condition: New
  • Fuel Type: Gasoline
  • Crankshaft Direction: Horizontal
  • Engine Type: 4-Stroke
  • MPN: S-13D1360010F1BH0040 = 13D136-0010-F1
  • Horsepower: 9.5
  • California Prop 65 Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
  • All returns accepted: Returns Accepted
  • Modified Item: No
  • Item must be returned within: 30 Days
  • Brand: Briggs & Stratton
  • Custom Bundle: No
  • Model: 13D136-0010-F1
  • Return shipping will be paid by: Buyer
  • Non-Domestic Product: No
  • Refund will be given as: Money Back

    Description

    Briggs & Stratton Snow Engine 208CC 950 9.5
    Qualified to start down to -20 F
    2-year limited warranty
    S-13D1360010F1BH0040=13D136-0010-F1
    Weight 43 lbs.
    Here some pictures of a re-power we just did on a 2000 Toro 521 The only modification we did was the snow shoot had to move out from handle
    You Tube Video
    https://youtu.be/NmhgL-hI0VA
    This is only for the engine
    This engine is direct from Briggs & Stratton they were ship in crates of 8 engines. We will re-box and ship them out. They will NOT be in a Briggs & Stratton packaging.
    We are in Parowan Utah will calls are welcome.
    It will be plus shipping. Box size 18” X 18” X 18” 43 lbs.
    In short if you are re-powering a Snowthrower These measurements are industry standard. Please check on your old engine to make sure it will fit.
    The PTO Shaft is ¾”X 2-27/64” 5/16-25 Tap 3/16” Keyway
    Height from Base to PTO approx. 4 1/8”
    Base mounting holes 3 1/8” X 6 ¾”
    Pull Start only
    Model Series
    13D1
    Power Lbs/Ft of Torque
    9.5
    Engine Series
    950
    Displacement
    208
    Oil Capacity
    20 oz (0.6 l)
    Valve Configuration
    OHV
    Flywheel Torque
    65 lb/ft (88.0 Nm)
    Governor Arm Torque
    40 lb/in (4.5 Nm)
    Carb Mount
    40 lb/in (4.5 Nm)
    Plug Gap
    0.03 in (0.75 mm)
    Intake Valve
    .004-.006 in (.10-.15 mm)
    Exhaust Valve
    .006-.008 in (.15-.20 mm)
    Idle Speed
    1750
    Air Gap
    .010-.014 in (.25-.36 mm)
    Flywheel Puller Part
    19203
    Flywheel Holder Part
    19433
    Connecting Rod Torque
    125 lb/in (14.0 Nm)
    Sump Torque
    210 lb/in (24.0 Nm)
    Head Torque
    210 lb/in (24.0 Nm)
    Technical Specifications
    Model Series
    13D1
    Power Lbs/Ft of Torque
    9.5
    Engine Series
    950
    Displacement
    208
    Oil Capacity
    20 oz (0.6 l)
    Valve Configuration
    OHV
    Flywheel Torque
    65 lb/ft (88.0 Nm)
    Governor Arm Torque
    40 lb/in (4.5 Nm)
    Carb Mount
    40 lb/in (4.5 Nm)
    Plug Gap
    0.03 in (0.75 mm)
    Intake Valve
    .004-.006 in (.10-.15 mm)
    Exhaust Valve
    .006-.008 in (.15-.20 mm)
    Idle Speed
    1750
    Air Gap
    .010-.014 in (.25-.36 mm)
    Flywheel Puller Part
    19203
    Flywheel Holder Part
    19433
    Connecting Rod Torque
    125 lb/in (14.0 Nm)
    Sump Torque
    210 lb/in (24.0 Nm)
    Head Torque
    210 lb/in (24.0 Nm)
    Alternator Specifications
    Alternator
    591533
    Type
    AC Only
    Testing RPM
    3600
    AC Volts
    12vac
    Crankshaft Specifications
    Service Part Number
    594147
    Square PTO Key #1
    0.188 x 1.791 x 0.106
    PTO Keyway #1 (mm)
    4.78 x 45.5 x 2.69
    PTO Threads
    0.375-24 UNF
    PTO Shaft Diameter (in)
    0.75
    PTO Shaft Diameter (mm)
    19.05
    PTO Shaft Length (in)
    2.42
    PTO Shaft Length (mm)
    61.468
    We at Red Rock Turf are a stocking distributor for Briggs and Stratton, Kohler,  and Toro. We not only sell their OEM parts we also use them on our equipment repairs and rebuilds. If there is something you need and don’t see it on one of our auctions, please email me through eBay and I can get it in and create an auction for that item.