EBD-M05 Electronic Load Tester Battery Capacity Power Bank Test 19.5V 5A 30W

Description

Home
Arduino
Module
Sensor
Chips
About Us
1. Features
1.1 Battery Capacity Test
This tester is designed for discharging of a wide range of batteries, including NiMH, NiCd,
LiPo, LiFe and Pb, as well as the capacity test.
1.2 Portable Power Bank Test
This tester supports charging and discharging of portable power banks, as well as capacity test.
1.3 Power Performance Test
This tester supports performance and aging tests of various kinds of DC power supplies.
2. Specifications
1) Power Supply: MicroUSB cable (5V)
2) Voltage Range: 0.1-19.50V (cut-off voltage can be set according to specific needs)
3) Current Range: 0.05-5.00A (maximum power is 30W, current will be restricted when the power reach over 30W), discharging current can be set according to specific needs
4) Test Modes: Constant Current Discharging (CC), testing will automatically stop when voltage reaches the set cut-off value.
5) Data Display: Four digital tube which can show testing data such as voltage, current, capacity and energy.
6) PC Connection: Micro USB cable.
3. Connecting Pattern
3.1 Testing Ports
The tester has four jacks which connect with M+/A+/A-/V+/V-. A+ and A- ports are connected with the positive and negative poles of the test objects, working as the current channel in discharging. V+ and V- ports are connected with the positive and negative poles of the test objects, working as the voltage channel in voltage tests. This way of using four individual cables will help eliminate the effect of wires on the test result and improve the test precision.
3.2 PC Connection:The tester can be connected with a computer through a Micro USB cable.
3.3 Input Power:The tester will work on the power supplied through Micro USB port.
4. Display and Setting
4.1 Buttons
There is a setting knob (rotate to left/right and press) on the tester.
4.2 Operation Display
The tester can show voltage, current, capacity (led display red) and energy (led display green)during working. You can switch to different data by rotate knob.
Voltage display: Automatically switch between 0.00V to 00.0V
Current display: 0.00A
Capacity display: Auto switch between 0000 and 00.00. The unit of measurement is mAh in 0000 mode, and Ah in 00.00 mode.
Energy display: Auto switch between 0000 and 00.00. The unit of measurement is mWh in 0000 mode, andWh in 00.00 mode.
Press knob to start test under testing mode and press again to stop test.
You can open setting mode by pressing knob for 2 seconds in the stop state (This function is invalid when the tester being connected with the PC software).
4.3 Setting Display
In setting mode, the value to be set will shine. Press knob to switch to the value you want to change and rotate knob to set the value.
First set the discharging current: you can set the value of every digital.
Second set the cut-off voltage: testing will automatically stop when the testing voltage reaches below this value.
It will go back to the limit value if your setting exceeds the allowed range.
After finishing setting, press knob for several seconds to return to testing mode.
5. Precautions
1) Positive and negative connections should not be reversed.
2) Always use the tester within the allowed range.
3) PC connection software: EB Tester Software,and English manual will send by email if you need.
Package list:
- EBD-M05 Load Tester * 1
- Manual and software will send by email if you need. It is in English.
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.