Pushrod, 3/16" Chrome Moly, 5.200" Length Predator 212 Gx200 Clone CMPR-55-520

Description

At OMB Warehouse, we strive to provide the greatest selection and quality of parts for your outdoor power equipment.Need other parts to complete your project? Check out our huge catalog - we have what you need.Heavy Duty Chrome Moly 3/16"Push rod, 5.200" Length. Considerably stiffer than stock. Use with all HD springs. Capable of 10,000 RPM  ALL PUSH RODS ARE SOLD INDIVIDUALLY. YOU MUST ORDER 2 PER MOTOR The following are recommendations only and may not work for all applications. See notes for regarding pushrod length. GX200, BSP "Clones", 6.5 Chinese OHVs5.260 Stock Length; Use with stamped Rocker Arms5.160 (-.100); Use with Billet & Roller Tip Rocker Arms
Pushrod, 3/16" Chrome Moly, 5.200" Length Predator 212 GX200 Clone
At OMB Warehouse, we strive to provide the greatest selection and quality of parts for your outdoor power equipment.
Need other parts to complete your project? Check out our huge catalog - we have what you need.
Heavy Duty Chrome Moly 3/16"Push rod, 5.200" Length.
Considerably stiffer than stock. Use with all HD springs. Capable of 10,000 RPM
ALL PUSH RODS ARE SOLD INDIVIDUALLY. YOU MUST ORDER 2 PER MOTOR
The following are recommendations only and may not work for all applications. See notes for regarding pushrod length.
GX200, BSP "Clones", 6.5 Chinese OHVs
5.260 Stock Length; Use with stamped Rocker Arms
5.160 (-.100); Use with Billet & Roller Tip Rocker Arms
5.110 (-.150); Use with Billet/Roller Tip Rockers along with extensive milling (>.065")
5.440 (+.180); Allows use of 160 Lifters in 200 blocks to reduce valve train weight. Reduces combined lifter/Pushrod weight by approx 7%. Use with stamped Rocker Arms
5.340 (+.080); Allows use of 160 Lifters in 200 blocks with Billet or Roller Rockers. Also use with some Aluminum Rockers
212 Predators (Non-Hemi)
5.200; Stock length
5.110 Use with Billet & Roller Rockers
5.260 Use with Aluminum Rocker Arms
212 Predators (Hemi Head)
5.540 Stock Length, most applications
5.440 (-.100) use with extensive milling
5.260 use with NR Racing Hemi Rollers
5.160 use with NR Racing Hemi Rollers and heads milled .065 or more, also with large base circle cams.
Note: Due to differences in cam base circles, deck heights, head milling, gasket thickness, rocker arms, etc., actual
push rod
length can vary. Pushrods are sold for the experienced engine builder. We recommend you assemble the motor first and then determine correct pushrod length. One of the best ways is to grind a stock pushrod until you get correct geometry, measure, and order one closest to that size.
We do not accept returns on any electrical components. If you're unsure if the item is an electrical component, please contact us.