-40%
US】6 Axis NVCM USB Mach3 Stepper Motor Motion Control Card Breakout board 125KHz
$ 31.67
- Description
- Size Guide
Description
US】6 Axis NVCM USB Mach3 Stepper Motor Motion Control Card Breakout board 125KHzGood News:
We have USA Warehouse in USA,so we will ship this product from USA to you
Fast shipping time,no duty and no VAT to you.
Package:
1 x 6 Axis Mach3 USB Card NVCM
1 x USB Cable
English Manual Will send by Email.
【USA Stock & Free VAT & Fast Shipping】
6 Axis
NVCM Mach3 USB Motion Control Card
1. Performance parameter
1) Support USB;
2) 16 ports photoelectric isolated input interface;
3) 16 ports photoelectric isolated output interface;
4) 1 port 0-10V spindle speed analog output interface(can change to PWM output);
5) can support 6 axis stepper systems,125KHz pulse output for every axis;
6) ARM motion control chip;
7) Main device is 12V-32VDC power supply input,current should higher than 1A;
2.Product connection define and method
the connection of the controller includes power supply interface, USB connection interface, MPG interface, Stepper/Servo control output interface, spindle control output interface, Estop and limited switch and tool setting input interface and so on. Now we descript them in details as below.
3. Stepper motor control interface
The marked No. 8 are 6 axis stepper motor controller port. They are
X/Y/Z/A/B/C from left to right. Each axis's pin is defined as COM+/CP-/DIR- from left to right.
4. Spindle control output/ Universal output interface 1
We define the interface from left are: GND1(Output GND),VSO(0-10V adjustable speed
output),OT1,OT2,OT3,OT4.
Take Nowforeuer inverter as the example. Spindle control output and the inverter connection
showed as Figure 2-7.If ACM and DCM are closed,only need to connect one port.
VSO real output voltage=10V*s spindle setting speed/max spindle speed.Forexample,if max
spindle speed is 24000,current spindle speed is S=18000,so the VSO output
voltage=10*18000/24000=7.5V.
Max. spindle speed setting ports ,open it from Pulley from Menu config.
The current spindle speed can be set by S directive or Mach 3 spindle setting speed module.
5.Product Size
The product overall size is 150mm*84mm*20mm
The bottom install size is 125.5mm*71.5mm
Shipping
Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately
Items will be shipped within 1-2 days upon the receipt of payment.
Payment
We accept paypal payment, all Paypal must be confirmed(shipping and billing address must match and correct and it need tell us your telephone no for delivery)
Problem&Feedback
Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it.
We are a new member in ebay now, and need understand both of sides
Pls email us before you want to leave any negative feedback
Refund
When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos
Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost
Contact us
Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again
Customer’s satisfaction is very important to us.